Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser designed for CAN buses. It's discreet and does not have LED indicators or key fobs, and is concealed in the wiring of your vehicle.
The user can also disable the system temporarily using Transport Mode when renting their car. This guide will take you through the steps of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser protects your car from key hacking attacks, cloning attacks and relay attacks. The system is directly connected to the ECU of your car and protected by a PIN code you select. It is inaccessible to thieves using diagnostic scanners or other modern methods, and it is unable to be disabled by circuit cuts.
The system is easy to use, however professional installation is advised to ensure a perfect connection with the ECU of your vehicle. An approved installer from Thatcham can assist with the installation and programming of your Ghost system. try what she says can also recommend an alarm or tracking system to complete the protection package for your vehicle.
First, the installer must disconnect the battery to prevent the possibility of airbag deployment and short circuits. After this is completed, the installer can safely begin work. Hand tools are essential for securing connections with precision and a multimeter can be used to check the electrical properties and safety. Insulation tape and cable ties are also essential for protecting connections and keeping wiring neat. Lastly, the user manual gives specific guidelines that are specifically tailored to your Ghost Immobiliser model.
It is important to choose the right grounding spot that is free of any paint or debris during installation. Installers must also ensure that the immobiliser's wires CAN H and CAN L are connected to the correct ECU ports. The wires can be plugged in or soldered based on the model. To ensure a reliable and durable connection it is recommended that you choose a high-quality plug.
Transport Mode can be activated by the customer after the installation is complete. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times over two seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 immobiliser is TASSA approved and is a highly efficient immobiliser. It's a great choice for anyone who frequently rents their vehicle through platforms such as Turo. An immobiliser can reduce the cost of insurance, as it lowers the chance of theft.
Getting Started
It's not difficult to come up with an autowatch immobiliser if you want to protect your vehicle from theft. The device protects your vehicle from being started the theft or copies the key. It's possible because of its advanced technology that stops the engine from starting until the correct PIN code is entered.
The device connects to the vehicle's bus network CAN which allows direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the best way to protect your pride and joy. It will not lose its value in the event that you decide to sell it.
Installing an immobiliser from Ghost is simple however, you must follow the directions to avoid electrical issues and malfunctions of the system. First, you must locate a 12V power supply and a solid grounding on the car's chassis. Then, you can begin connecting the wires to the immobiliser. Be sure to use high-quality connectors and soldering methods to ensure a strong connection. Also, ensure that you protect the connections by insulating them by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other problems.
Once the wires have been connected, you can connect the battery and start the engine to determine whether the immobiliser is functioning. When everything is functioning correctly you can place it in a secure location under the dash or somewhere else in the vehicle. Make sure to hide it properly to stop thieves from getting into it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association) that means it is a top-quality deterrent to car burglars. It is resistant to hacking and key cloning and is not able to be disabled without the code. The device is easy to use and can be set into an option for a service valet so that your vehicle will not be activated if you take it for an MOT or servicing.
Wiring
The Ghost Immobiliser is a cutting-edge security system that is designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. The Ghost Immobiliser will not interfere with the factory settings of your car, unlike other aftermarket systems which require the removal of circuit elements.
It's also totally undetectable by thieves using diagnostic scanning devices. This is because the system does not transmit and receive radio frequency signals, and it relies on the CAN data format to communicate with your ECU. Additionally, it doesn't require any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one buttons) and turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. Now you can start your vehicle and drive in a safe manner.
Once installed, Ghost Immobiliser guards your vehicle from key cloning or hacking while preserving its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you have to hand your car over for service or valet parking.
You'll need a constant power source (12V) and a grounding point to complete the installation of a Ghost immobiliser. Be sure that both are well-insulated and can be touched. It's also recommended to use cable ties to bundle and secure the wires, since this will reduce the risk of being tampered with by thieves. To avoid making mistakes, make sure to double-check these points and mark them using the use of tape or labels. It's important to check every connection for signs of wear and tear. Connections that are loose can cause system malfunctions, so be certain that they are securely in place and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will make sure that the unit functions correctly and that all connections and insulation are secure. Be sure to correct any issues immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your car's ECU to stop unauthorized motor starting. Its cutting-edge technology protects your vehicle against hacking and key cloning as well as other methods employed by thieves to steal cars. The Ghost works in conjunction with existing alarm and tracking systems to provide the most effective protection for your vehicle. This system's unmatched features and subtle design make it a preferred choice for car enthusiasts and security-conscious motorists alike.
To ensure the proper integration of the Ghost Immobiliser, you must to follow the steps of the installation process. Refer to the wiring diagram of the vehicle as it will help you locate and connect the wires. You'll need to determine the power and grounding sources. Once you've identified these, you'll have to mark them in a way that they're easy to identify when installing. It is essential to use top-quality materials and tools. Hand tools are a must with making precise connections while a multimeter can check electrical values and ensure security. Cable ties and insulation tape will keep the connections neat and tidy. Finally, a user manual will give specific guidelines specific to your Ghost model.
It is important to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser functions in the way it was intended, preventing unauthorized vehicle starts. This procedure should be carried out regularly as part your regular vehicle inspections in order to ensure that the system is always working correctly.
After the installation has been completed, you are now able to start driving your vehicle with confidence. The Ghost will keep your pride and joy secure from thieves who might steal it, ensuring that nobody can escape with your car without the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This lets you track your car in the event that it's stolen.
The Ghost can be used in a variety of vehicles and is compatible with all major brands. Monty's Locksmith can assist you in securing your vehicle using this cutting-edge device. Contact us today to find out more about our service and installation options. We are a TASSA Installer who is registered This certification ensures that we adhere to the strictest standards and procedures for installing our products. ghost immobiliser birmingham ensures customers as well as insurance companies and law enforcement agencies that all installations are carried out safely and properly.